Goodwill & Company

Material：HSS

Point Angle：118°

•General drilling, can be widely used.

•Point Angle : 118°, and the diameter tolerance is subject to h8 of JIS B040K (dimensional tolerance). However, when it is less than 1mm, it is 0~0.01mm.

Diameter	LCF	OAL	Diameter	LCF	OAL	Diameter	LCF	OAL	Diameter	LCF	OAL
0.3	3	19	3.5	45	73	6.7	73	105	9.9	95	130
0.4	5	20	3.6	48	76	6.8	73	105	10.0	95	130
0.5	7.5	27	3.7	48	76	6.9	73	105	10.1	98	133
0.6	8.5	30	3.8	48	76	7.0	73	105	10.2	98	133
0.7	10	32	3.9	51	79	7.1	75	108	10.3	98	133
0.8	11	34	4.0	54	83	7.2	75	108	10.4	98	133
0.9	13	36	4.1	54	83	7.3	75	108	10.5	100	137
1.0	18	40	4.2	54	83	7.4	78	111	10.6	100	137
1.1	20	42	4.3	54	83	7.5	78	111	10.7	100	137
1.2	20	42	4.4	56	86	7.6	78	111	10.8	103	140
1.3	22	45	4.5	56	86	7.7	81	114	10.9	103	140
1.4	23	48	4.6	56	86	7.8	81	114	11.0	103	140
1.5	23	48	4.7	59	89	7.9	81	114	11.1	103	140
1.6	25	50	4.8	59	89	8.0	81	114	11.2	106	143
1.7	25	50	4.9	62	92	8.1	84	117	11.3	106	143
1.8	28	52	5.0	62	92	8.2	84	117	11.4	106	143
1.9	28	52	5.1	62	92	8.3	84	117	11.5	106	143
2.0	29	55	5.2	64	95	8.4	87	121	11.6	109	146
2.1	29	55	5.3	64	95	8.5	87	121	11.7	109	146
2.2	33	58	5.4	64	95	8.6	87	121	11.8	109	146
2.3	33	58	5.5	64	95	8.7	87	121	11.9	109	146
2.4	35	61	5.6	67	98	8.8	89	124	12.0	111	149
2.5	35	61	5.7	67	98	8.9	89	124	12.1	111	149
2.6	37	64	5.8	67	98	9.0	89	124	12.2	111	149
2.7	37	64	5.9	67	98	9.1	89	124	12.3	111	149
2.8	39	67	6.0	70	102	9.2	92	127	12.4	114	152
2.9	42	71	6.1	70	102	9.3	92	127	12.5	114	152
3.0	42	71	6.2	70	102	9.4	92	127	12.6	114	152
3.1	42	71	6.3	70	102	9.5	92	127	12.7	114	152
3.2	42	71	6.4	73	105	9.6	95	130	12.8	114	152
3.3	45	73	6.5	73	105	9.7	95	130	12.9	114	152
3.4	45	73	6.6	73	105	9.8	95	130	13.0	114	152