Goodwill & Company

AD-TM 系列

- Feature

It is mainly used to check the torque of electric driver.Of course, it can be used to check manual torque wrenches.

You can choose appropriate measuring range from 6 models from 1N･cm(0.1kgf･cm) to 20N･m(200kgf･cm) according to required torque.

The measuring torque value conforms to the torque data of Torque Analyzer (torque analysis system).

The digit number switch function ( 3 digits /4 digits ) was added under many customers’expectation.

Following functions are normally equipped .

・USB connection

・Printer output (the printer is exclusively for Digimatic miniprocessor from MITUTOYO(DP-1VA))

- Accessory

・AC adaptor (IN:AC100V-240V OUT:DC9V 1 piece

・USB cable 1 piece

・Attachment for driver 1 piece

・Attachment for electric driver 1 piece

・Screw (Excluding a special attachment) for the attachment 2 pieces for each.

AD-TM Series

Model(AD-)	TM1	TM5	TM10	TM50	TM100	TM200
Measurement range	±1.000 ～±10.00 Ｎ・cm	±5.00 ～ ±50.00 Ｎ・cm	±10.00 ～ ±100.0 Ｎ・cm	±0.500 ～ ±5.000 Ｎ・m	±1.000 ～ ±10.00 Ｎ・m	±2.00 ～ ±20.00 Ｎ・m
	±100.0 ～ ±1000 gf・cm	±0.500 ～ ±5.000 kgf.cm	±1.000 ～ ±10.00 kgf・cm	±5.00 ～ ±50.00 kgf・cm	±10.00 ～ ±100.0 kgf・cm	±20.0 ～ ±200.0 kgf・cm
	±0.100 ～ ±1.000 lbｆ・in	±0.500 ～ ±5.000 lbf.in	±1.000 ～ ±10.00 lbｆ・in	±5.00 ～ ±50.00 lbｆ・in	±10.00 ～ ±100.0 lbｆ・in	±20.0 ～ ±200.0 lbｆ・in

Accuracy	±0.5%F.S.
Display	Four digits LCD
Measurement mode	Peak (maximum value)/Track(present value)/P-P(hold left and right peak values)
Power supply	Chargeable battery Ni-MH(1.2v×4 cells 1650mAh)
Unit of measurement	N･m(N･cm)/kgf･cm(gf・cm)/lbf・in 　(Switchable)
Auto power off	Power off after leaving for 10 min.(Measurement without any time limit is also available)
dedicated charger	input:AC100V～240V 　output:DC9V
Basic machine weight	About 2.4kg